March 07

Novastar Mctrl660 Synchronous Controller - LED Screen Parts

LED failure cannot be found in the regular inspect [...]

LED failure cannot be found in the regular inspection test of LED industry Novastar MCTRL660. Under severe conditions such as high temperature, low temperature, and rapid temperature changes, it is caused by the difference in thermal expansion coefficients of LED chips, epoxy resin, brackets, inner leads, die-bonding adhesives, PPA cups and other materials, resulting in different internal stresses. The mechanism of LED failure caused by electrostatic discharge is very complicated. Equipment, tools, utensils, and human bodies may carry static electricity and discharge it. This static electricity ranges from several hundred volts to tens of thousands of volts. The discharge time is in the nanosecond range Level.

March 02

LED Screen Parts — Technical Tips on Getting the Most from Your...

Technical Tips on Getting the Most from Your Outdo [...]

LED Screen Parts

LED Screen Parts was founded in Jun.2016 by Mr. Amos Poon, an overseas LED screen engineer who has rich experience with LED screen troubleshooting from theory and practice for more than 6 years of global site work experience. This platform dedicated to providing all kinds of LED screens parts to customers all over the world with professional and fast response service, of cause also the proper and brand-new products Novastar VX4S. Meet customers’ demand is the first and most important mission for the whole team. To become the world’s largest LED display screen integrated after-sales service solution provider.

Technical Tips on Getting the Most from Your Outdoor LED Display

In addition to ensuring the quality of the screen body, the pillar type LED display has an important place that must be considered, that is, the pillar of the LED display. The inspection of the safety of the pillar of the outdoor LED screen module can mainly be carried out in the following three aspects.

01 Inspection Of The Base Of The LED Display Column

There are two main forms and arrangements of the foundation: 1. One is the balanced gravity type, that is, the upper load is mainly balanced by the large-volume foundation gravity, which is generally a concrete foundation. This base form is suitable for use when the soil is soft and has an open construction site. 2. The other is a pile foundation type, which is mainly a reamed pile. This type of foundation method can be selected under the condition of limited construction site. When determining the base of the advertising screen, it is first necessary to check its initial drawings and construction materials, and then excavate the base if the conditions agree, and check whether the base method, burial depth, and scale are in accordance with the drawings. LED display base bolts are sampled for strength testing. For other site surveys, when choosing an advertising screen with a balanced gravity foundation, special attention must be paid to the presence or absence of foundation soil bulges around the roots of the steel columns, and the foundation formed after the foundation is shaken under wind load. The collapse of the soil surface, if any, indicates that the anti-overturning of the base can not meet the requirements, and there is a danger of collapse at any time under the action of strong wind, and it must be reinforced immediately.

02 Check The Material Of The Column And The Quality Of The Connection With The Foundation

First of all, it is necessary to measure the deviation of the steel column of the LED display Novastar MRV336. The deviation of the steel column cannot be greater than 1000 / H. It must be measured in two directions. Secondly, the steel quality of the steel tube column of the advertising screen can be checked. It is divided into uniformity, whether there are inter layers, cracks, non-metallic inclusions and significant segregation. When there is doubt about the quality of the steel, the safety of the structural members shall be ensured. Finally, check whether the steel pipe column is corroded and the quality of the steel structure protective coating. The quality of protective coatings for steel structures shall be tested in accordance with the relevant national equipment standards.

Outdoor LED display steel pipe columns and foundations are generally bolted or welded. For bolted connections, check for missing bolts during inspection, and the bolts must not be deformed, slipped, loosened, etc. if there are design drawings, the specifications and models of the bolts must meet the design requirements; the bolts should be rust-proofed. If the corrosion is serious, it must be replaced immediately, and the bolt fastening should be firm and reliable. For high-strength bolts, the embedment depth of the bolts must meet the requirements of the specification.

03 Inspection Of The Upper Steel Frame Member System

At present, the connection between the steel column and the upper steel frame member system is usually in the following two forms: 1. One is T-shaped, and the main frame is formed by the T-shaped fixed connection between the steel column and a horizontal main beam on the upper part. The NovaPro UHD Jr is connected to the T-shaped rigid frame structure through each pendant and diagonal support. 2. The other type is a space truss, whose main skeleton is welded by an independent steel column and several horizontal main beams parallel to each other. The main beams are connected by horizontal and diagonal supports to form a space truss system. The display is mounted directly on the main frame.

Due to the heavy weight of the outdoor LED display column, there will be some hidden safety hazards after using it for a period of time. The main structure of the LED display must be regularly inspected and maintained to ensure safety.

Novastar MCTRL300 Novastar J6 LED Sign parts

More you might like

February 24

On Screen Monitoring Functionality available in LED Products


When LCD, LED, and projection are used in combination, or the number of signals is large, it may cause a large difference in the display effect between each image, and you cannot individually adjust the individual images that are different. Multi-channel independent adjustment function can easily solve this problem. It can carry out targeted image processing to make the overall picture more harmonious and unified packages. View More >> NovaPro HD


February 20

Practical Application of Seamless LED Splicing Technology in Engineering


Seamless stitching technology is a special, highly demanding projection display application that can achieve multi-screen image fusion together and reduce the stitching gap to the smallest so that it completely overlaps the stitching technology. The seamless stitching technology not only requires a complete ultra-large screen, but also has special requirements for the projection used to project an oversized picture. The biggest difference between seamless stitching technology and BSV Novastar VX4U technology is the small gap.


February 20

Process of the Emergency Body Water Treatment


Organize personnel to blow dry the LED display screen body that is in the water. Do not put the LED display screen body that has been flooded into the air box, this will easily suffocate the LED lights and MRV300. When water in the warehouse or water in the LED display screen is found, it should be dealt with urgently without delay. Adjust the brightness (full white) to 30%, and age for 12 hours after power on.


February 13

Evaluation of Micro-Pitch LED Show Technology


The display with density above P2 generally uses 1515, 2020, and 3528 lights, and the NovaPro UHD Jr shape adopts J or L package. Side welding pins, the welding area will be reflective, the ink effect is poor, it is necessary to add a mask to improve the contrast. The density is further increased, and the L or J package cannot meet the application requirements. A QFN package must be used. The characteristics of this process are no lateral welding pins and no reflection in the welding area, which makes the color rendering effect very good.